8″ gate valve
6 inch gate valve
“2”” gate valve”
Manual ball valve, three-piece ball valve and gate valve are the same type of valve, the difference is that its closing part is a sphere. A valve in which the ball rotates around the centerline of the valve body to open and close. The ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. The three-piece ball valve is a new type of valve that has been widely used in recent years. This type of valve should generally be installed horizontally in the pipeline.
Ⅰ. Working principle of manual ball valve
The working principle of the manual ball valve is to make the valve unblocked or blocked by rotating the valve core. The ball valve switch is light, small in size, and can be made into a large diameter, reliable in sealing, simple in structure and convenient in maintenance. The sealing surface and the spherical surface are often in a closed state and are not easily eroded by the medium, and are widely used in various industries.
Ⅱ. Opening process of manual ball valve
(1) In the closed position, the ball is pressed against the valve seat by the mechanical pressure of the valve stem.
(2) When the handwheel is turned counterclockwise, the ball valve stem moves in the opposite direction, and the angular plane at the bottom makes the ball disengage from the valve seat.
(3) The valve stem continues to lift and interacts with the guide pin in the helical groove of the valve stem, so that the ball begins to rotate without friction.
(4) Until it reaches the fully open position, the valve stem is lifted to the limit position, and the ball rotates to the fully open position.
Ⅲ. Closing process of manual ball valve
(1) When closing, rotate the handwheel clockwise, the valve stem of the manual ball valve begins to descend and the ball leaves the valve seat and starts to rotate.
(2) Continue to rotate the handwheel, the valve stem is acted by the guide pin embedded in the upper spiral groove, so that the valve stem and the ball rotated 90° at the same time.
(3) When it is about to close, the ball has rotated 90° without contacting the valve seat.
(4) When the handwheel rotates for the last few turns, the angular plane at the bottom of the valve stem of the manual ball valve is mechanically wedged to press the ball, so that it is tightly pressed on the valve seat to achieve complete sealing.
The above is the general content of the opening and closing process of the manual ball valve. Please contact us for more details.
Related News & Blog
Application and Selection Principle of Stainless Steel Ball Valve
1. Application of stainless steel ball valveStainless steel ball valve adopts handle, gear, electric, turbine, pneumatic and other driving methods. Mainly used in oil extraction, pipeline transportati…
Do You Know the Selection Standard of Stainless Steel Check Valve?
We know that stainless steel check valves are generally used to prevent backflow of the medium, so they are installed on equipment, equipment and pipelines. It is generally suitable for cleaning media…
Weidouli Valves and BAOTI Group Signed a Strategic Cooperation Agreement
On July 16, our chairman and general manager Xia Chongmao and BAOTI Group general manager Jia Shuanxiao signed a strategic cooperation agreement for the next four years on behalf of both parties.On th…